Blackmagic Design Updates USRA Mini Pro G2 With Firmware 6.4

This software update package allows you to update your Blackmagic Camera to the latest software release for new features, bug fixes and other enhancements. You Can Purchase the Ursa Min Pro G2 Here

The software installer no longer installs the Desktop Video or UltraScope applications and they will need to be downloaded separately from the Blackmagic Design website: https://www.blackmagicdesign.com/support

To use UltraScope via Thunderbolt with Blackmagic Cinema Camera or Production Camera 4K, download and install the Blackmagic UltraScope software. If you want to use Media Express with the supported cameras, download and install the Blackmagic Desktop Video software.

Please ensure that your device is plugged into mains power before running the software update. To update Blackmagic Camera Fiber Converter you will need to ensure that the unit is powered from the camera using the URSA 12V power supply rather than SMPTE fiber during the update.

For updating URSA Mini, URSA Broadcast and Pocket Cinema Camera 4K from Camera 4.0 or above it is advisable to export your presets and LUTs onto a card as they will be removed during this update.

What's new in Blackmagic Camera Setup 6.4

New features for Blackmagic Studio Fiber Converter and Camera Fiber Converter

• Add menu to Studio Fiber Converter.
• Add audio meters to Studio Fiber Converter.
• Add ability to adjust Camera Fiber Converter XLR input levels.
• Add ability to use program audio feed as source from DB25 connector.
• Add ability to adjust levels for headset gain and microphone gain.
• Add PTZ de-embedding from ATEM via SDI Camera Control Protocol.
• Add ability to configure talkback for production & engineering channels.

New features for URSA Mini Pro G2

• Retain jam synced timecode after power cycle.
• Improved jam sync timecode accuracy after playback.
• Improved HDR SDI metadata support.
• Improved pixel recalibration.
• Improved door LED behaviour on low battery.
• Improved clip playback for renamed clips.
• Improved EF lens metadata support.
• Fixed still capture to slow media cards.
• Fixed audio playback at 23.98, 29.97 and 59.94 fps.
• Fixed XLR gains resetting after power cycle.
• General performance and stability improvements.

New features for URSA Viewfinder

• Improved support for URSA Mini Pro G2 built in LUTs.
• Improved overlays when used with URSA Mini Pro G2.
• Improved UI elements for drop frame timecode.
• Improved UI elements for URSA Mini Pro G2 USB-C record.
• Improved iris readout.
• Fixed record dot bug with status display.

New features for URSA Studio Viewfinder

• Improved support for URSA Mini Pro G2 built in LUTs.
• Improved overlays when used with URSA Mini Pro G2.

No new features in 6.4 for other camera models.

Minimum system requirements for macOS

• macOS Mojave 10.14 or better
• macOS High Sierra 10.13 or better
• A suitable USB 2.0 port
• Thunderbolt port for UltraScope and Media Express when using Blackmagic Cinema Camera or Blackmagic Production Camera 4K

Minimum system requirements for Windows

• Microsoft Windows 10 64-bit
• Microsoft Windows 8.1 64-bit
• A suitable USB 2.0 port
• A suitable Thunderbolt port when using Blackmagic Cinema Camera or Blackmagic Production Camera 4K

Installing Blackmagic Camera Utility

Before installing the software on Windows, we recommend that you run "Uninstall Blackmagic Camera Setup” first.

The Blackmagic Camera Installer package installs:

• Blackmagic Camera Setup
• Uninstall Blackmagic Camera Setup
• User Manuals

While installing Camera Update on URSA Mini and URSA Mini Pro you may notice a pause around the 10% mark in the install process, this is normal and will continue installing after around 20 seconds.

After loading the software on the Blackmagic Cinema Camera PL, EF or MFT, you may notice a slight flickering on the built-in LCD screen. This is normal and expected behavior. The flickering will go away after a few minutes of operation.