Wiremold

The Empty Access Table Box is designed to be installed into furniture to allow for easier access to installed plug strips closer to the point-of-use. The box installs directly into worksurfaces that have been cut to accommodate the box and secures to the...

CM2-BL-Gy - CM 2A Blank Module required to fill unused openings.

USB charging. 2.4A USB type A receptacle charges faster than other USB receptacles and is compatible with USB 2.0 and 3.0 type devices.Tamper-resistant receptacles. Tamper-Resistant, patented shutter system prevents improper insertion of foreign objects...

5' (1.5m) length with 12'' spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040'' (1.0mm) steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4...

5739WH - 500/700 Solid Base Fixture Box Fitting used to hang fixtures. Cover accepts devices with mounting screw centers of 2 3/4",, 3 1/2",, and 4 1/16", [70mm, 89mm, and 103mm]. Base has four holes for fixture studs, four 1/2", trade...

V5735 - 500/700 Distribution Box Fitting twistouts permit use of three parallel raceway runs on each side. Base has 1/2", and 1", concentric trade size KOs and a 1 13/16", [46mm] x 2 7/8", [73mm] rectangular KO to mount on a one-gang...

500TSV FT PLATE-TELE-1IN OPENINGFACTORY WARRANTY MAY NOT APPLY. RADWELL 2-YEAR WARRANTY INCLUDED

AV3SHTCBS - AV3 Poke-Thru Slide Holder nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series...

RC9SHTCVY - RC9 Single-Service Poke-Thru Device Nonmetallic Slide Holder Assembly available in black (BK), gray (GY), ivory (VY), nonmetallic brass (BS), and nonmetallic aluminum (AA). Assembled with scrub water gasket. For use on tile or carpet floors.

Brushed aluminum duplex cover plate with flip lids, 5 1/2\' (140mm) for carpet. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for...

RPAV3CTCAB - Ratchet-Pro Series Multiple Service Floor Box Cover Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the...

AV3CTCAB - AV3 Poke-Thru Finish Flange and Slide Holder one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass...